Related Products Chlorination, Ozone: Chlorination system |
|
Safety system curency failure
Power supply for max 10 hours (without alarm)
Battery type : 12 V-Bloc,7,0 Ah
Dimensions 500 x 500 x 300 (BxHxT)
Pr...
|
|
|
Safety valve for vacuum controller CEM11 hose connection 8/12
|
|
|
Measuring water pump 230 V/50 Hz. Max pump capacity 3.4 m3/h
|
|
|
Instrument block for potentiostatic chlorine measurement with the following integrated components ready for plate mounting :
- dirt trap with 0.5 mm ...
|
|
|
Sensor for free chlorine platinium-copper
|
|
|
Signal horn, 230 V 50 Hz
|
|
|
Solenoid Valve G1/2, PN10, 23V/50Cy/14VA, IP65, brass/NBR.
|
|
|
Large size flanged ejectors, PVC or rubberized cast iron, capacity up to 200 kg/h, connection, DN 65/PN 10, flange DN 65/PN 10
|
|
|
Solution ejector type 15, DN 15, PVC, Qmax. 2.5 kg/h C12, 8 bar max. back pressure, gas connection DN 15
|
|
|
Solution Ejector type 32
DN 32, PVC,Qmax. 20 kg/h, C12,Gas connection DN 32
|
|
|
Solution Ejector type 32 DN 32, PVC, Qmax. 25 kg/h, C12, Max. back pressure 9.5 bar, gas connection DN 32
|
|
|
Solution Ejector type 50, DN 50 PVC , Qmax. 60 kg/h, C12, gas connection DN 65
|
|
|
Solution ejector type A, DN 15, pvc, Qmax. 1 kg/h C12 gas connection DN 15
|
|
|
Solution ejector Type 15, DN 15, pvc, Qmax. 6 kg/h C12 gas connection DN 15
|
|
|
Spare filling for the activated carbon filter
|
|
|
Spares set for C7700 up to 2500 g/h
|
|
|
Spare part kit for safety valve consisting of 1 diaphragm and 1 valve seat
|
|
|
Spare for WSS-400 consisting of
filter, flow monitor,reed contact,float element ,activated carbon catridge,O-ring for activated carbon cartridge.
|
|
|
Spare parts
Spare Parts for pre-chlorination consisting of
1) One spare set for C2700
2) Pressure reducing valve C7105 gauge 0-16 bar ST/Ag conn...
|
|
|
Spare parts kit for vacuum chlorinator CEM11 without inlet valve, consisting of, 1 working diaphragm, 2 O-rings
|
|
|
Spare parts kit for inlet valve CEM11-12 consisting of, 1 Filter, 2 Seat valves, 2 balls, 3 O-rings
|
|
|
Spare parts kit for vacuum chlorinator CEM12 without inlet valve, consisting of, 1 working diaphragm, 2 O-rings
|
|
|
Spare sensor for chlorine
|
|
|
Spares Set for CEM25 without solution ejector and non-return valve.
|
|
|
Spring Safety Valve for Cl2:
DN 25,PN 25/40, blast-off pressure 15.5 bar flanges according to DIN 2512, with notch cone can be lifted up with closed ...
|
|
|
Tank Auxiliary Valve
Application: Tank auxiliary valves are connected to the tank valve of the pressure container. If the container is exchanged, con...
|
|
|
Tank Auxiliary Valve
Application: Auxiliary valves are connected to the tank valve of the pressure container. If the container is exchanged, containe...
|
|
|
Tee-fitting for sample water from the by-pass ring main, to be mounted directly on sample water pump, with pressure gauge 0-6 bar, throttle ball valve...
|
|
|
Vacuum collecting line PVC two way +1 ball valve DN 10 connections hose d8/12
|
|
|
Ventilator (supplied by a third party)
|
|
Oil Egypt E-Marketplace - Subscription Packages - Benefits |
||
|
